3D-Manufaktur
Materials

Which material for which part?

In short: ASA or ASA-CF outdoors, PA6-CF for parts under load and heat, PETG for tough everyday parts and PLA for the best finish indoors. The final choice depends on the application and is proposed with the quote.

Updated:

3D-printed gears, a fan wheel and other plastic mechanical parts
Materials

Which material for what

Plastics differ a lot. What matters is the application: indoors or outdoors, heat, load or looks.

What will the part be used for?
Or compare by
PA6-CF The highest strength and stiffness, very heat resistant. Typical for: Technical parts under load, fixtures

Rated 1 to 5 based on manufacturer data sheets. UV resistance and looks based on material type.

All ratings as a table
MaterialHeatStrengthStiffnessUV & weatherLooks
PLA1/52/52/51/55/5
PETG2/53/52/53/53/5
ABS3/52/52/52/53/5
ASA3/52/52/55/53/5
PETG-CF2/52/52/53/54/5
ASA-CF3/52/53/55/54/5
PA6-CF5/55/55/53/53/5

The materials in detail

PLA

Dimensionally stable, clean finish, wide choice of colours.

Good for
Decor, models, displays, gifts, name signs
Less suited to
Heat (e.g. in a car in summer) and permanent outdoor use

PETG

Tough, slightly flexible, more moisture and chemical resistant than PLA.

Good for
Holders, housings, everyday parts, household spare parts
Less suited to
High temperatures and very stiff parts

ABS

Heat and impact resistant, easy to finish.

Good for
Housings, technical parts, car interiors
Less suited to
Permanent sun outdoors: that's what ASA is for

ASA

Similar to ABS, plus UV and weather resistant.

Good for
Outdoor parts such as fence caps, covers, signs, add-on parts
Less suited to
Parts under very high load

PETG-CF Carbon

PETG with carbon fibres: quality matte finish, hardly warps.

Good for
Visible technical parts, dimensionally stable holders
Less suited to
High impact loads

ASA-CF Carbon

ASA with carbon fibres: weatherproof, stiffer, refined matte finish.

Good for
Loaded outdoor parts, premium add-on parts
Less suited to
Parts meant to flex

PA6-CF Carbon

Polyamide with carbon fibres: the highest strength and stiffness, heat deflection around 200 °C according to the manufacturer's data sheet.

Good for
Technical parts under load, fixtures, parts in warm environments
Less suited to
Coloured visible parts (mostly black); absorbs moisture, which is accounted for in the design

What does CF or carbon mean?

CF stands for carbon fibre reinforced: short carbon fibres are mixed into the plastic. This makes parts stiffer and more dimensionally stable, with a quality matte surface. It is a reinforced plastic, not a carbon laminate as used in car or boat building.

Which plastic is UV resistant?

ASA and ASA-CF. They keep their shape and colour in the sun, so they are the choice for outdoor parts. PLA is not suited to permanent outdoor use, PETG only to a limited extent.

Which plastic withstands heat?

PA6-CF the most, with a heat deflection of around 200 °C according to the manufacturer's data sheet. ASA and ABS tolerate much more heat than PLA and PETG. PLA softens at temperatures reached inside a car in summer.

Are different colours available?

Yes. PLA, PETG, ABS and ASA come in many colours, including several colours in one part. Carbon fibre reinforced materials are mostly black or anthracite.

FAQ

Frequently asked questions

Which material is right for my part?

That depends on the application: indoors or outdoors, heat, load, looks. The material is proposed with the quote and agreed together.

Is 3D-printed plastic food safe?

Food-contact parts are not made.

Where do the ratings come from?

Heat, strength and stiffness from the manufacturers' data sheets; UV resistance and looks based on material type. The 1 to 5 scale is for orientation.

Enquiry

Request a quote

What is it about?
Files (optional)
    Contact and details

    Quote within 2 working days. Your details are used only to handle the enquiry. Privacy (DE)

    Request a quote →